Effect of Delays in Afterheat Removal on Consequences of Massive Air Ingress Accidents in High-Temperature Gas Cooled Reactors

Massive ingress of air into the core of a high-temperature gas cooled reactor is among the accidents with a low occurrence frequency, but there are still gaps in understanding with respect to its consequences. In the present paper, massive air ingress combined with a delayed start of the afterheat removal system is investigated and compared to air ingress, accidents with normal operation of the afterheat removal procedure. A computer programme REACT/THERMIX used for these accident analyses is described. For a high-temperature gas cooled reactor with a pebble bed core, it is shown that massive air ingress has no real safety endangering consequences even if the operation of the afterheat removal system is delayed by 6 h.     

LWR Fuel Safety Research with Particular Emphasis on RIA/LOCA and Other Conditions

Fuel safety research at Japan Atomic Energy Research Institute (JAERI) is reviewed on the major subjects including studies on fuel behavior under postulated Reactivity Initiated Accident (RIA), postulated Loss of Coolant Accident (LOCA) and normal operating conditions. Nuclear Safety Research Reactor (NSRR) at JAERI has been utilized extensively for the studies of fuel behavior under RIA conditions. For the studies of fuel rod and cladding behavior under LOCA conditions, outpile experiments were conducted. The work on this subject has been concluded. Pellet Cladding Interaction (PCI) has been major subject on fuel integrity study during normal operating conditions. Irradiation experiments at Halden Boiling Water Reactor (HBWR) as well as code development are described.     

分散染料易染海岛复合聚酯纤维的热应力分析

以易水解聚酯(EHDPET)和新型分散染料常压可染聚酯(NEDDP)分别作为海与岛组分,通过熔融纺丝方法,制备了不同复合比的海岛复合聚酯的预取向丝(POY)。采用动态热应力仪模拟纤维加弹工艺,对EHDPET-NEDDP POY进行了不同拉伸温度、拉伸速度、拉伸倍数下的热应力测试。结果表明:随着温度从140℃提高到180℃,POY的热应力呈减小趋势;而当拉伸速度从60 m/s提高至100 m/s,或拉伸倍数从1.4增大到1.8时,POY的热应力均呈增大的趋势。     

新型驱油剂在子北试验区的应用研究

子北油田部分油区注水时机滞后,致使油藏压力下降,能量亏空严重,注水效果不佳,针对这种问题,积极探索三次采油化学法的应用。在子北油田选择试验区,开展新型驱油剂的现场试验,平均单井产量明显提高。     

桂东南客家民居的类型与特点

桂东南是广西最主要的客家聚居区，相应的客家民居类型可分为基本类型、发展类型、变异类型和相关类型四大类，其中基本类型有堂屋和横屋，发展类型有堂横屋、围龙屋、围楼、围堡和围村，变异类型有传统变异和洋式变异，相关类型有祠堂和碉楼，各种类型之间存在或强或弱的关联，并共同塑造了桂东南客家民居的围合性、对称性、向心性、秩序性和匀质性等特点。     

Development of low-loss lead-germanate glass for mid-infrared fiber optics: II. preform extrusion and fiber fabrication

For lead-germanate glass fibers, reducing the content of hydroxyl (OH) groups and the formation of metallic Pb species is essential to pave the way for their applications as low-loss mid-IR fiber optics since OH and metallic Pb species cause intense absorption and scattering loss, respectively, in the mid-IR spectral range. The first part of this study reported the optimization of the glass melting procedure to obtain low amount of OH while preventing formation of metallic Pb species in lead-germanate glass. Here, the second part of this study reports the investigation of the process conditions to fabricate low-loss lead-germanate glass fiber through further understanding of the co-effects of glass melting and heat treatment atmospheres on the formation of nano- and micron-scale metallic Pb species in both the as-produced and heat treated lead-germanate glasses. Finally, using this advance in knowledge, we successfully fabricated low-loss lead-germanate glass fibers with no presence of reduced metallic Pb particles by optimizing dehydration agent, glass melting, preform extrusion and fiber drawing conditions. The optimized fabrication conditions reduced the unstructured fiber loss by almost one order to <0.3 dB/m at 1.55 μm.     

Using the external magnetic field of composites to control fiber orientation and enhancement of electrical conductivity

The industrial developments have led to more applications of various composites. Since fiber orientation and distribution will influence product performance in composites, controlling said orientation and distribution is of critical importance. This study used external magnetic fields to control the fiber orientation and distribution in a polymer. The orientation of the actual fibers under magnetic field control during flowing was observed using a visualization system, which was made by PMMA and transparent epoxy as an upper cover and filling polymer. In order to clearly observe and calculate, 0.1 wt% fiber content was used, and 0.3 wt% fiber content was used to measure conductivity. Fiber distribution angles without a magnetic field concentrate parallel to the flow direction (0° ~ 30° and 151° ~ 180°) while distribution angles under magnetic field control were concentrated along the magnetic field direction, which was perpendicular to the flow direction (61° ~ 120°). The higher the magnetic flux density, the larger the torque of the electromagnetic field on the fibers and the higher the orientation of fibers was with the magnetic field. The electrical conductivity was 12.23 times higher for 1 mm fibers in an external magnetic field versus no magnetic field.     

V2O5 nanosheets assembled on 3D carbon fiber felt as a free-standing electrode for flexible asymmetric supercapacitor with remarkable energy density

As an emerging energy storage device, supercapacitor is widely investigated owing to its excellent capability, quick charge-discharge and tremendous cycle life. The operation potential window, energy density and mass loading of supercapacitor must be taken into deep consideration for its practical application. In this work, an outstanding electrode based on CFF@V₂O₅ nanosheets was prepared. Then a free-standing asymmetric supercapacitor with CFF@V₂O₅ composite as positive electrode and CFF@AC as negative electrode was assembled. Owing to the functional groups produced on CFF after the activation, V₂O₅ nanosheets was immobilized. The composite exhibits remarkable specific capabilities of 1465 mF cm^?2 (492 F g^?1). The energy density of the assembled free-standing asymmetric supercapacitor achieves 0.928 mWh cm^?3 when the power density is 17.5 mW cm^?3. After 6000 charging-discharging cycles as under normal, bended and anti-bended conditions for respective 2000 cycles, the device retains 89.7% of the initial capacitance, exhibiting fascinating cycle stabilization. Finally, two devices linked series can lighten a LED of 1.8 V for 2 min after charging for 2.5 min, which is inspiring for the practical application and production of self-supporting asymmetric supercapacitors.     

Evaluation of bismuth doped La2-xBixNiO4+δ (x = 0, 0.02 and 0.04) as cathode materials for solid oxide fuel cells

Bismuth doped La_2-xBi_xNiO_4+δ (x = 0, 0.02 and 0.04) oxides are investigated as SOFC cathodes. The effects of Bi doping on the phase structure, thermal expansion, electrical conduction behavior as well as electrochemical performance are studied. All the samples exist as a tetragonal Ruddlesden-Popper structure. Bi-doped LBNO-0.02 and LBNO-0.04 have good chemical and thermal compatibility with LSGM electrolyte. The average TEC over 20–900°С was 13.4 × 10^?6 and 14.2 × 10^?6 K^?1 for LBNO-0.02 and LBNO-0.04, respectively. The electrical conductivity was decreasing with the rise of Bi doping content. EIS measurement indicates Bi doping can decrease the ASR values. At 750 °C, the obtained ASR for LBNO-0.04 is 0.18 Ωcm², which is 56% lower than that of the sample without Bi doping, suggesting Bi doping is beneficial to the electrochemical catalytic activity of LBNO cathodes.     

Boson peak and structural heterogeneity in ternary SiO2-Al2O3-B2O3 glasses

We use low-temperature heat capacity, low-frequency Raman scattering, and THz time domain spectroscopy in order to scale the vibrational density of states and the Boson peak in SiO₂-Al₂O₃-B₂O₃ Yb-laser host glasses. When substituting B₂O₃ for SiO₂ at constant Al₂O₃ dopant level, we find an optimal value for the ratio of B/Al in terms of mixture stability, at which the excess in the electron donor capability of Al₂O₃ (relative to the SiO₂ backbone) is compensated by the more acidic B₂O₃. At this composition, Al₂O₃ plays a mediating role in the structure of aluminoborosilicate glasses, facilitating dissolution of Yb₂O₃ and admixture of B₂O₃ into the SiO₂ network.